Setting Up; Connecting The Cables - Medion MD 90152 Handbuch

Setting up

Connecting the cables

Connect the external hard disk to your computer using a free USB
port. You can also connect the hard disk to computers with a USB 1.1
port however the speed of transmission will be slower.
1. Start your computer and wait until Windows
loaded.
2. Connect the mini-USB connector of the supplied Y-cable to the
USB port of your external hard disk.
3. Connect the other end of the Y-cable which has two USB Type-A
connectors with the following labels:
The 'MAIN' connector must be connected to your PC / Notebook
at all times when in use; the 'AUX' is an addition power source,
in case your PC / Notebook does not supply sufficient power
strength with one USB port. We recommend to connecting both
USB Type-A (MAIN & AUX) connectors to your PC / Notebook's
USB ports when using the hard drive.
4. With Windows
ognized and connected.
6
USB connection
®
XP/Vista the hard disk will be automatically rec-
English
(Back view)
®
has been fully