RUSTA 624013410101 Gebrauchsanleitung Seite 4

ENG
ASSEMBLY
1. To get started, you need one of Rusta's 3 different start sets (purchased separately):
A. STARTING SET
MANUAL TIMER
Attach the timer and pressure
reducer to the tap.
A
USE OF OUTPUT CONNECTORS
Attach the output connector with one or two outputs depending on how you want to build your
system. Secure the hose in the hole/holes by inserting the hose into the opening until it covers the
entry hole from the inside.
How the output connectors are used depends on how you want to construct your system:
• When using one output, a system can only be constructed outwards from the pressure reducer.
• When using the dual output connector, two systems can be constructed starting from the
pressure reducer, for going in different directions (for example, when the pots are in different
locations).
4
B. STARTING SET
AUTOMATIC TIMER
Attach the timer and
pressure reducer to the tap.
B
C. STARTING SET
AUTOMATIC TIMER WITH PUMP
If you do not have a tap, use the
STARTING SET AUTOMATIC TIMER
WITH PUMP, which pumps water
from an external water source.
C