Werbung
Verfügbare Sprachen
Verfügbare Sprachen
S3250
Air Impact Wrench, 12,5 mm (1/2")
1. Caution for Use
1.1 Air pressure
Please always keep the proper pressure of air inlet at 90psi (6.3kg/cm²) to maintain the longest
tool life.
1.2 Air line
Use a 3/8" air hose between the compressor and the tool. Compressed air is cooled and its
water content separated, as soon as the air leaves the compressor.
SW-Stahl und Werkzeugvertriebs GmbH
Leverkuser Strasse 65
D-42897 Remscheid
Tel. +49 (0) 2191 / 46438-0
Fax +49 (0) 2191 / 46438-40
E-Mail: info@swstahl.de
www.swstahl.de
Werbung
