Operation - wehncke 12193 Benutzerhandbuch

Operation

GB GB
You must ensure the water in the pool must match the water line printed on the pool wall.
Never dry-run the power pack as such type of operation willl void the guarantee.
Filter key
On-off key for the filtration system Press this key and the
filter pump will start working and the red indicator lamp
will be on. Press again the pump will stop working and
the lamp will be off.
When the filter pump has worked for 168 hours, the let-
ters "FC" will appear on the display screen, accompa-
nied by a warning tone. At that time, the indicator lamp
for the key of filtration system will be on but the filter
pump will actually not work. The indicator lamp for the
key of heating system will be off and the heating system will not work. Only by pressing the
key FILTER again the indicator lamp for the key of filtration system will be off. At that time, the
letters "FC" on the display screen will disappear and so will the warning tone. Actual water
temperature will be diplayed. All keys return to normal working status.
"FC" and the warning tone are to remind the user to clean or replace the filter element.
Jet key
On-off key for the jet system. Press this key and the air pump will start working and the red
indicator lamp will be on. Press again and the jet system will stop working and the lamp will
be off. The jet system will stop automatically after working for 20 minutes. If there is still need,
you have to wait for 10 minutes and then press the "Jet" key again.
During the time period which the bubbling function has been started and worked for 15 mi-
nutes, bubbling can be stopped or started. During the time period that the jets have been
worked for 15 minutes and stopped, bubbling can be stopped but not be started. The re-
starting of jets should wait for 10 minutes. When the jets have been on for 20 minutes and
stopped, the function cannot be started again within 10 minutes.
Heater key
On-off key for the heating system. Press this key the heating system will start working and the
red indicator lamp will be on. Press again and the heating system will stop working and the
lamp will be off.
When pressing down the key "Heater", the heating system will start working and the red in-
dicator lamp will be on. At the same time, the red indicator lamp of the key FILTER will also
be on and the filter pump will start working, too. This is a normal penomenon required by the
design.
When the preset temperature has been reached, the heating system will stop working while
the heating indicator lamp will not turn off. The filter pump will stop working and the filtration
indicator lamp will be off. When the water temperature falls to 2 below the preset tempera-
ture, the heating system will start working automatically and so will the filter pump. The filtra-
tion indicator lamp will be on.
22