Specifications - Audio Design SoundStream xxx-6500 Bedienungsanleitung

INTRODUCTION
Dear Customer,
congratulations on your purchase of this high end
car audio device. This amplifier provides high-
performance sound reinforcement for your
mobile audio equipment. The Multi-Mode
bridging capabilities allow flexibility in
hosting several different speaker
configurations.
To achieve optimum
performance, it is highly
recommended that
you read this
Owner's Manual
before beginning
with the installation
of the amplifier.
FEATURES
Max Power
Damping factor
Operating frequency(band-width)
Input Sensitivity
Low-Pass crossover slope attenuation factor
Subsonic (cut/increase) range factor (15Hz - 40Hz)
Continuously variable low-pass control(range)
Continuously variable phase control(range)
Continuously variable bass boost control(range)
Source voltage (Automobile battery)(range)
Maximum DC current (1 Ohm, 1 % THD +n)
Dimensions(L x W x H)
Test voltage
Platinum RCA connectors
Strap-able; Slave-master relationship
* "maximum" current consumption reading was extracted at the impedance
specified and at a source voltage of 13.5V DC
Source voltage is limited to 11V - 16V.
If source voltage beyond this limit is applied to the Amplifier, the warranty will be voided.

SPECIFICATIONS

SOURCE
OUTPUT
POWER
10
RMS
13.5V DC 14.4V DC
1697 1750
2905 3290
4082 4490
THD +n(%)
13.5V DC 14.4V DC
1.0 1.0
1,0 1.0
1.0 1.0
XXX-6500
7000Watts
350<@80Hz(+/- 5Hz)
15Hz -150Hz
0.5 - 10,0 (volts)
24dB / octave
18dB
50Hz - 150Hz
0 -180°
0 -16dB
11-16V DC
456 amperes DC *
650 x 290 x 65 mm
13.5V DC & 14.4V DC
LOAD
4 Ohm
2 Ohm
1 Ohm