Connecting To The Mains; Settings; Mode Selection - Renkforce 1168975 Bedienungsanleitung

c) Connecting to the mains
Make sure the product is switched off before connecting to the mains. The
on/off switch must be on O (OFF) position.
• Connect the barrel connector of the power adapter to the power jack (12) on the
back of the product.
• Connect the power adapter to a wall socket.
• Switch on the product. The on/off switch must be on I (ON) position.
Switch off the product when not in use. If not using the product for a longer
period of time, disconnect the power adapter from the wall socket.

9. Settings

a) Mode selection
First select one of the following 6 modes depending on the light effects connected. To
do so, press the Channel mode button (2) until the respective LED lights up.
Description
For modes M4 and M6 the dimmer value is fixed at 255.
28
M1
M2
M3
M4
M5
M6
Mode
RGB
RGBD
RGBW
RGBWD
DRGB
DRGBW