Renkforce 1168975 Bedienungsanleitung Seite 23

• Only connect the power adapter to a normal mains socket connected to
the public supply. Before plugging in the power adapter, check whether
the voltage stated on the power adapter complies with the voltage of your
electricity supplier.
• Never connect or disconnect power adapters if your hands are wet.
• Never unplug the power adapter from the mains socket by pulling on the
cable; always use the grips on the plug.
• When setting up the product, make sure that the cable is not pinched,
kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in
them. This poses a risk of injury.
• For safety reasons, disconnect the power adapter from the mains socket
during storms.
• If the power adapter is visibly damaged, do not touch it. Risk of fatal injury
due to electric shock! First turn off the power supply to the power outlet
that the power adapter is connected to (flip off the fuse and then turn off the
residual current operated circuit breaker to disconnect the power outlet at
all phases). Now unplug the device from the power outlet. Dispose of the
power adapter in an environmentally friendly fashion, discontinue use of it
immediately. Replace it with an identical power adapter.
• Never use the product immediately after it has been brought from a cold
room into a warm one. The condensation generated could destroy the
product. The plug-in power supply unit also involves danger to life by electric
shock! Allow the device to reach room temperature before connecting and
using it. This may take several hours.
• Never pour liquids over electric devices and never place liquid-filled
objects near the device. If liquid or an object enters the interior of the device
nevertheless, first power down the respective socket (e.g. switch off circuit
breaker) and then pull the mains plug from the mains socket. Do not operate
the product anymore afterwards, but take it to a specialist workshop.
23