Connection To The Chimney - LA NORDICA SUPER MAX Gebrauchs- Und Wartunghandbuch

Chimney stove SUPER MAX - SUPER JUNIOR
CHIMNEY CAPS - DISTANCES AND POSITIONING
Inclination of the roof
α α α α
15°
30°
45°
60°

6. CONNECTION TO THE CHIMNEY

For safety reasons the door of the appliances with constructive system 1, must be opened only for the
loading of the fuel or for removing the ashes, while during the operation and the rest, the door of the hearth
must remain closed.
The appliances with constructive system 2 must be connected to their own flue. The operating with open
door is allowed under supervision.
The stove is endowed with an upper exhaust pipe. The connection pipe to the flue must be the shortest
possible, right, tight and according to the current regulations.
The connection to the chimney must be performed with stable and strong pipes (we recommend a
thickness of 2 mm). The pipe for smokes exhaust must be fixed hermetically to the chimney. The diameter
inside the connection pipe must correspond to the external diameter of the smokes exhaust small trunk of
the stove. This is ensured by pipes according to DIN 1298.
ATTENTION : Eventual flammable pieces in the area of 20 cm's round the connection pipes must be
changed with fireproof and not sensitive to heat materials.
Instructions for installation, use and maintenance – EN – Rev.01
>A
H min.
(1)Asse colmo
α
Distance between the roof ridge and the
stack
A (m)
< 1,85 m
> 1,85 m
< 1,50 m
> 1,50 m
< 1,30 m
> 1,30 m
< 1,20 m
> 1,20 m
> _ A
0,5 m
(2)Tetto
Picture 7
(1) Ridge axis
(2) Roof
UNI 10683/98
Minimum height of the stack
(measured from the outlet )
H (m)
0,50 m
above the roof ridge
1,00 m
from the roof
0,50 m
above the roof ridge
1,30 m
from the roof
0,50 m
above the roof ridge
2,00 m
from the roof
0,50 m
above the roof ridge
2,60 m
from the roof
23