Operating The Breast Pump - Beurer BY 70 Gebrauchsanweisung

5. To switch on the breast pump, press the
switching on the breast pump for the first time, the software
will be in dual pump mode "2". During these two minutes, your
breast nipples will be stimulated in order to prepare them for
pumping the breast milk. This mode should always be selected
for two-sided pumping. The breast pump will begin automat-
ically in stimulation mode (
appear on the display. During these two minutes, your breast
nipple will be stimulated in order to prepare it for pumping the
breast milk. Use the
lation intensity.
6. After the two minutes have passed,
the display. To begin pumping the breast milk, press the
button. Use the
that is comfortable for you. Stop using the pump once there is
180 ml of milk in the bottles.
7. If you want to switch back to stimulation mode, press the
button. The stimulation and the two-minute timer will start
from the beginning.
The breast pump has a memory function, which recalls
the last programmed stimulation or pumping level when
it is switched on.
Please note: the one-sided pump mode "1" or dual pump
mode "2" will also be stored. For dual pump mode "2", the
adapter for two-sided pumping must be connected to the
motor unit.
8. To switch off the breast pump, press the

7.3 Operating the breast pump

b) Preparation for one-sided pumping:
1. Before using the breast pump, wash your hands and breasts
thoroughly.
2. The breast pump must be connected to the silicone tube for
one-sided pumping and to 1 small bottle.
) and a two-minute timer will
/ buttons to set the desired stimu-
/ buttons to select a suction intensity
button. After
will start to flash on
button.
25
1. Switch on
stimulation
mode
2. Intensity
3. Start pumping
4. Intensity
5. Back to stimulation mode