Connecting; Installation In The Lt100; Connecting The Cables - Sony LZ60-P1 Bedienungsanleitung

3. Connecting

3-1. Installation in the LT100

3-2. Connecting the cables

10
1. Remove the decorative panel from a counter board connection slot on the rear panel of
the LT100 display unit and insert the counter board.
2. Secure the counter board firmly using the screws that held the decorative panel.
• The counter board connection slot numbers (SIG. IN 1 to SIG. IN 5) shown on the
rear panel correspond to the slot number indicators (1 to 5) on the front panel.
• The counter boards may be inserted to the connection slots in any order.
Note
Be sure to turn off the power before connecting the counter board. Inserting or removing
the counter board with the power on may damage the display unit and the counter board.
• Be sure to secure the connection cables or take other measures to prevent accidental
disconnection.
• Be sure to turn off the power before connecting or disconnecting the measuring probe.