Spypoint IR-8 mode Bedienungsanleitung Seite 28

28
T
Test
to indicate that normally, a photo or video would be recorded. If
the system does not detect the movement, increase the distance
detection using the wheel « DISTANCE » or realign the system
differently. When you understand how the device responds to
detections, you can better adjust the direction or the height of
the installation.
Settings
button «» or «» and confirm the choice with « OK ». The
system will change all the menus in English by itself.
Work:
delay:
Multi-shot:
Video length: Allows you to select the recording duration
teSt
To use to set the camera or the distance
setting. When the « TEST » mode is selected,
no picture or video is recorded. Walk
perpendicularly in front of the camera. When
the camera detects movement, the light winks
SettiNGS
Serves to allow own operator settings. To
configure the system in English, press the
button «» until « Language » is highlighted.
Press « OK », select « English » with the
24H: Photos or videos anytime.
Day: Photos or videos during daytime only.
Night: Photos or videos during night time only.
To select the time interval before the camera
records another photo or video. This option
prevents from taking too many photos
or videos.
To take up to 6 consecutive shots at each
detection, with a 10 second delay between
each photo. This option allows up to 6 pictures
from different angles when the camera is in
« PHOTO » mode.
when the camera is set in « VIDEO » mode.