Important Safety Instructions - Pepeo Turno Montage- Und Bedienungsanleitung

IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OB-
SERVE THE FOLLOWING: READ AND SAVE THESE INSTRUCTIONS
1. Be cautious! Read all instructions and safety information before installing your new fan.
2. To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or
fuse box before beginning.
3. Remember that your ceiling fan requires a grounded electrical supply of
220 Volts to 240 Volts AC at 50/60 Hz
4. Installation work and electrical wiring must be done by qualified person(s) in accordance with appli-
cable codes and standards, including fire-rated construction.
5. Use this unit only in the manner intended by the manufacturer.
6. Before you begin installing the fan, switch power off at Service panel and lock service disconnec-
ting means to prevent power from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service
panel.
7. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utili-
ties.
8. Make sure the installation site you choose allow the fan blades to rotate without any obstructions.
To reduce the risk of injury to person, the fan must be mounted with the blades at least 2.3m from the
floor to minimize the possibility of accidental contact with the fan blades.
9. To ensure proper support, only install the ceiling fan mounting bracket onto the concrete ceiling
with 2 expansion bolts and nuts.
10. Warning: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box or sup-
porting system acceptable for fan support. The outlet box must be able to support mounting weight of
45 lbs, and must be secured to a beam with screws to prevent box from coming loose. For safety and
best operating results, we recommend that you have a qualified electrician assemble and install your
fan.
11. To reduce the risk of fire or electric shock, Do not use this fan with any solid-state speed control
device.
12. Do not mount in an area where the fan could possibly get wet. If this unit is to be installed over a
tub or shower, it must be marked as appropriate for the application.
13. All electrical wiring must conform to nation and local electrical codes. Make sure the fan is electri-
cally grounded to avoid possible electrical shock.
14. Warning: To reduce the risk of personal injury, Do not bend blade holders during installation to
motor, balancing or during cleaning.
15.Do not insert foreign object between rotating blades. Note: When motor is taken out from carton,
please put it on a soft cloth to avoid any damage on the ornament surface.
16. Before servicing or cleaning unit, Switch power off at Service panel and lock service disconnec-
ting means to prevent power from being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service
panel.