Product Description; Technical Data - WOLFF 68679 Originalbetriebsanleitung

Product description

Important components of the machine
The numbering of the product features refers to the
illustration of the machine on the graphics page 2.
A
1 Motor
2 Cover
3 Diamond cutting blade
4 Supporting plate
5 Wheels
6 Handle
7 Mounting switch On/Off
8 Knurled nut
Bit stop
9 Cutting depth scale
10 Locknut
11 Spindle lock
12 Adapter (35mm - 45mm) vacuum cleaner
13 Cable with plug
14 Two pin wrench
Functional description
Please refer to the graphics on pages 2 and 3 while
you read the operating instructions.
10/2012 Estrichfugenschneider EF 135, #68679
Restriction of use
The screed grooving machine is designed exclusively for
cutting grooves in screed without the use of water and
in combination with a Dust Category M vacuum cleaner.
When the machine is used in another way, it shall be
regarded as unfit for the purpose.
Uzin Utz AG shall not accept any liability for damage
resulting from non-intended use.
Declaration of Conformity
We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: DIN EN 1037, EN ISO 12100, DIN EN
60204-1, DIN EN 60745-1, DIN EN 60745-2-22, DIN EN
55014-1, DIN EN 55014-2, according to the provisions
of the: 2006/42/EC, 2004/108/EC, 2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering of the
technical documentation.
10.02.2015 i.V.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1

Technical data

Power supply.................................................230 V AC
Frequency ...........................................................50 Hz
Power consumption..........................................1400 W
Maximum speed ......................................12.000 r.p.m.
Weight .................................................................4.5 kg
Sound pressure level....................................108 dB(A)
Sound energy level.......................................121 dB(A)
Hand/arm-vibration ........................................>2.5 m/s²
Max. grooving depth.....................................0 - 35 mm
Cutting blade....................diamond Ø 135 mm x 2 mm
Includes:
1 Screed grooving machine
1 Protective goggles
1 Hearing protection
1 Two pin wrench
1 Diamond cutting blade
1 Adapter vacuum cleaner
1 Operating instructions
1 Spare parts list
17