Sharp XE-A212 Bedienungsanleitung Seite 40

A212_3 FOR THE MANAGER
For easier programming for the direct PLU keys, the register especially allows you to program all parameters in
one procedure according to guidance messages displayed on the upper line of operator display, while you can
program parameters individually. (For these individual programming methods, please refer to next two sections
and "PLU text (item label)" on page 44.)
Follow the procedure shown below for direct key programming:
• To keep current setting on each programming, press the
guidance message is firstly displayed.
• When pressing the
data you entered before the press of
1. Specify the direct PLU key and its level.
• Press a level shift key and a direct PLU key in this
order.
Immediately after displaying the current text setting,
guidance message for the next step will be displayed
on the upper line and the corresponding PLU key
code you entered will be displayed on the lower line.
When you press a direct PLU key without pressing a
level shift key, level 1 is automatically selected.
2. Text programming
:
• Press key to enter text programming.
The text data currently set will be displayed on the
upper line.
• Enter an item name.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" for
entering the item name.
When you start entering a character, the current text
data will be overwritten by new data.
s
• Press the key to register the item name.
Guidance message for the next step will be displayed.
3. Unit price programming
• Enter a unit price using numeric keys.
A maximum of 6 digits can be set.
For a subdepartment, set the limit amount of unit
price entry.
s
• Press the key to register the unit price.
Guidance message for the next step will be displayed.
38
03.7.5 8:02 AM Page 38
A
key in the middle of procedure, the programming will terminate and the
A
s
(Press to skip)
s
(Press to skip)
s
key when the corresponding
is saved.
Key operation
[ ¡
:
MELON
s
500
s
Operator display
PLU.0071 PGM
0071 0.00
ENTER[00]KEY
0071 0.00
Guidance message
PLU code
PLU.0071 PGM
0071 0.00
Current text data
MELON PGM
0071 05
Overwritten by new data
PRICE
0071 0.00
PRICE
0071 500
ENTER DEPT#
0071 01