Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Refitting the tool / Changing the shear systems
Put the included blade guard into the blade(s) and use
protective gloves to protect yourself from injury.
Push both lateral push buttons concurrently and remove the
shearing blades (Fig. 5).
Remove any dirt from the gear area (if necessary).
Please slightly grease the drive area using commercial
universal grease as described in the Maintenance section
before putting the replacement shears in place (Fig. 7).
Lead the cutting blades with the rear holding toe into the
housing of the grass shears as shown in fig. 6 and lock the
click system in place by strongly pushing on the blade base
plate.
The position of the eccentric drive does not have to be
considered when changing the blades. When the device is
switched on, the gear eccentric unit automatically engages
into the appropriate relief in the shearing blade.
The device is now ready for operation.
Hints for your work with the tool
The shrub trimmer cuts ornamental shrubs and light
undergrowth or bushes. The device is also well-suited for
ornamental cuts as, for example, for the care of graves. As
the device is operated with one hand please be careful not to
move the other hand near the running cutting tools.
The grass shears allow for clean cuts of lawn edges or hardly
accessible lawn areas.
Maintenance
(Fig. 7)
Clean the blade from any crushed plants and dirt. The blades
should be detached at least once a season for the removal of
debris. Lubricate the C pinion and the D back of the blade with
a light oil. Do not lubricate the motor and other parts. Should
the blade become dull after a long period of use, a spare part
can be ordered.
Warning! The leading edges of the blades must be oiled to
ensure proper lubrication. If the leading edges are not oiled,
blade durability may be adversely affected.
If the cutting tools have become dull after long use please
replace them with original spare parts.
Clean the device using only a brush or cloth. Never wash
down the device with water and do never dip the device into
water.
Always clean and oil the blades after each use. Oiling of the
blades should ideally be carried out using an environmentally
friendly lubricant.
Replace blunt blades.
Always put on the blade guard after use.
Examine the tool for obvious defects and have it repaired in
an authorised service shop if required.
Storage
Always store the tool in a dry, clean place outside the reach of
children. Make sure that the place of storage is frost-free and
does not exceed 40°C.
7
Battery Powered Grass - and Shrub Shear- Operator's Manual
GB | Operating Instruction
Waste disposal and environmental protection
Please observe the following directions for the
disposal of the battery.
Batteries are not to be put into the rubbish. As a con-
sumer you are legally obliged to return used batteries and
accumulators. At the end of the product life, the batteries or
accumulators have to be taken from the apparatus, disposing
of them separately. You have the possibility of delivering your
old batteries and accumulators to the local collecting points
of your municipality or to your dealer or to the distribution
centers.
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose of the
device together with your domestic refuse, but dispose of it
in an environmentally friendly manner.
Please dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can be
separated and recycled. Information concerning the disposal
of materials and devices are available from your local
administration.
All postage or delivery costs as well as any other subsequent
expenses will be borne by the customer.
Repair service
Repairs to electric power tools should only be carried out by
specialist electrical personnel.
UK
Mantis UK Limited
Orchard House
Hempshaw Lane
Stockport
Cheshire SK1 4LH
Phone - 4401614741525
Europe
Mantis France SARL
20 rue des Garennes
Marly
France
51755
Phone - 330387628888
Werbung
Inhaltsverzeichnis
