Connecting The Power Supply - Conrad Raveland BRR 130 MK-II Bedienungsanleitung

Good places for installation are the luggage boot and the free space under the seats.
Make sure that the amplifier can be accessed in such a way that it can be connected
to the electrical system.
A favourite place of installation is also the bulkhead between the luggage
boot and the passenger compartment.
• Mark the holes for the screws at the place of installation. For doing this, use the
device as a pattern.
• Drill the holes for the fastening screws.
• Fasten the amplifier by the two screws delivered.

Connecting the Power Supply

The electric connection should always be performed by a specialist.
To avoid short circuits and resulting damages to the device the neg-
ative terminal (ground) of the car battery is to be disconnected first.
Before reconnecting the negative terminal to the battery, ensure
that the amplifier has been completely connected.
29