Switching Your Radio On For The First Time; Dab+ Mode; Storing Stations; Recalling A Stored Station - Albrecht DR 60 Benutzerhandbuch

3 Switching your radio on for the first time

 Power Supply:
The mains adapter is supplied with the package.
Connect the mains adapter to the DC power socket of the radio and to a wall socket.
Extend the telescopic antenna as far as it can go.

 The radio will automatically synchronize the clock. Then press the Power switch on the radio. The
LCD backlight will light up during the operation of the radio and start scanning for new stations.
If you can't hear any sound, then press the volume up key until you reach the desired level. If you
consider the volume is too high, then press the volume down key to reach the desired level.
To explore the stations that have been found you need to press "◄◄" or "►►" to switch to the next found
station. When you find a station that you would like to listen to, then press the S elect key or wait 5
seconds until the station is automatically selected. The current station name is shown on the LCD.
If you switch your radio on after your first use the radio will play the last used mode with the station that
was in last operation.

4 DAB+ mode

4.1 Storing stations

You can store up to 10 of your favorite stations to the preset keys, this will enable you to get access to
your favorite stations at the touch of one button.
To store a preset you must first be listening to the station that you would like to save, then press and
hold the "Preset" key. If you see "Empty P x" blinking on the LCD, you can change the selected memory
by pressing "◄◄" or "►►". When you have selected your desired memory you need to confirm the
selection by pressing "Select". Then "P x Saved" will be displayed on the LCD which means the station
has been stored successfully.

4.2 Recalling a stored station

Press the "Preset" key and select with the "◄◄" or "►►" keys the station that you want to listen to and
confirm it with the Select key.
14 English
Preset Key