Notes On Documentation; Safety Instructions; Product Description - Rittal DK 7030.100 Kurzbedienungsanleitung

EN
Notes on documentation, Safety instructions, Product description
1

Notes on documentation

This installation and short user's guide is intended for experienced trained specialists and contains only
EN
the most important information concerning the assembly, installation and function of the CMC III CAN-
Bus Sensor (subsequently called CAN bus sensor).
1.1 Associated documents
CMC III CAN-Bus Sensor assembly, installation and user's guide.
It is available at www.rittal.com and contains the complete application-relevant information and techni-
cal data for the CAN bus sensor with regard to:
– Further assembly possibilities
– Functions
– Configuration possibilities
– Detailed operating instructions
– Troubleshooting
2

Safety instructions

– Assembly and installation of the CAN bus sensor may only be performed by experienced trained spe-
cialists.
– The CAN bus sensor housing must not be opened.
– The CAN bus sensor may not come in contact with water, aggressive or inflammable gases and va-
pours.
– The CAN bus sensor may only be operated within the specified environmental conditions (see
section 3.4).
3

Product description

3.1 Functional description
The CAN bus sensor provides the capability to integrate a previous-generation CMC II sensor in the
CMC III system. It provides the values measured by this sensor to the connected CMC III PU. The CAN
bus sensor has an identification that allows it to be detected automatically by the CMC III PU.
3.2 Proper use
The CMC III CAN-Bus Sensor is used only for the connection of a CMC II sensor and the integration of
this sensor in the CMC III system. It may be used only together with the CMC III PU. Any other use is
not permitted.
3.3 Scope of delivery
– CMC III CAN-Bus Sensor
– Provided accessories (fig. 1)
– Installation and Short User's Guide
3.4 Operating conditions
The CAN bus sensor may only be operated under the following operating conditions:
Temperature operational range:
Humidity operational range:
Degree of protection:
6
+0°C to +55°C
5% to 95% relative humidity, non-condensing
IP 30 in accordance with IEC 60 529
Rittal CMC III CAN-Bus Sensor