B) Saving Measured Values - Carrera 9320231 Bedienungsanleitung

b) Saving measured values

Should the measured values be saved, it is necessary to press the
M1 or M2 button.
Then, the values are assigned to the respective user and lodged in
his memory area.
M/R-Symbol
Number of user (1)
When pressing the M1 (or M2) button the M/R sign flashes
and the measured value is assigned to the data memory of user
1 (or 2).
If a new measurement was effected, the new measured value is
lodged into the save location 1 and the value previously saved
automatically moved to save location 2 etc.
The measured value of the last save location gets lost if the save
capacity of 50 values per user is passed.
No. of save location
(appears in book
when calling up)
49