Cabletech URZ0921 Bedienungsanleitung Seite 11

Owner's manual
NETWORK PREVIEW
IMPORTANT: User can preview image from camera by login with
camera's IP on an Internet Explorer browser installed on a device
running Windows. Prior to using this function, user needs to
download a plug-in, and restart browser to login.
The DVR supports LAN and WAN access, as well as IP and domain
name access. Use Internet Explorer (version 7 or later, other
browsers may not support or restrict connection).
NOTE: The camera allows for its remote control and management
with the use of smartphone or computer. Please, keep in mind
that configuration of the devices for such use requires additional
knowledge and setting up! Please bear in mind, that remote preview
via smartphone is only accessible through devices running Android
/ iOS or a computer running Windows.
Internet Explorer browser settings
Prior to use IE browser access, configure its settings first:
1. Open the Internet Explorer
browser, go to "Tools" (ALT
+ X) > "Compability view
settings" and add camera's
IP address; click "Add" then
"Close".
2. Go to "Tools" (ALT + X)
again > "Internet options" >
"Security" > "Trusted sites"
> "Sites". Input camera's
IP address into "Add this
website to the zone" space.
Make sure the "Require
server verification (https:)
for all sites in this zone" is
unchecked. Press "Add",
then "Close" to approve changes and exit.
3. Next, go to "Internet" > "Custom level" and enable options in
"ActiveX controls and plug-ins" (as shown below - see point
10). Then press OK twice to confirm.
11
EN