Werbung
USB Type-C™
Not all USB Type-C™ ports support the full functionality of the USB Type-C™
standard. Some ports might only provide data transfers, and might not support video
or power delivery over USB.
To use this dock to its full potential, ensure that the host USB Type-C™ port from your
computer supports DP alt mode, as well as USB Power Delivery or Thunderbolt 3™.
The two USB Type-C™ ports on the docking station are traditional USB 3.0
downstream data ports. These ports do not support DP alt mode (video), or USB
Power Delivery.
Install and use the docking station
The dock will automatically install some of the required drivers once it is connected to
your laptop's USB Type-C™ port. If you receive a prompt to automatically install the
driver(s), follow the on-screen instructions to complete the installation.
Connect your devices to the appropriate ports on the dock. Connect your external
display(s) to the dock's video port(s).
Note: Video output capabilities are dependent on the video card and hardware
specifications of your connected host laptop. Certain video cards have limited MST
support, while some monitors will also limit the available resolution.
Configure a display device
Please setup your display settings accordingly to your operating system and
requirements.
For detailed information, see the corresponding operation manual and description
of your operating system. Your laptop hardware must support dual external displays
(e.g.: MST). You can set up dual displays by using the video output ports
(1x DisplayPort™ and 1x HDMI
Supported video resolutions
The docking station supports 4K Ultra HD resolution if the connected HDMI or
DisplayPort display supports it.
Number of Displays
2
1
1
Note: Mac OS does not support MST
Manual IB-DK2403-C
).
®
Video Output
DisplayPort and HDMI
HDMI
DisplayPort
Resolution
1920x080p@60Hz
2560x1400@60Hz
3840x2160p@30Hz
3840x2160p@30Hz
Werbung
