Technical Details; Mounting Accessories Included; Electrical Connection - AEG DK 1190 Benutzerinformation

Technical Details

Model:
Dimensions (in cm):
Height:
Width:
Depth:
Maximum absorbed power:
Motor absorption:
Lighting:
Length of the cable:

Electrical connection:

Fuse rating:

Mounting accessories included

1 chimney support
1 deflector
1 reduction flange Ø 150-125 mm
6 screws 5 x 45 mm (for wall mounting)
6 Wall dowels Ø 8 mm (for wall mounting)
2 Hooks with wall dowels
2 screwdriver bits (for TORX screws)
2 screws 3 x 9 (to fix the upper chimney)
2 screws 3,5x9,5 (to fix the deflector)
Electrical connection
Safety warnings for the electrician
The mains power supply must correspond to the rating indicated on the
plate situated inside the hood. If provided with a plug connect the hood
to a socket in compliance with current regulations and positioned in an
accessible area. If it not fitted with a plug (direct mains connection) or if
the plug is not located in an accessible area apply a bi-polar switch in
accordance with standards which assures the complete disconnection
of the mains under conditions relating to over-current category III, in
accordance with installation instructions.
IMPORTANT: Before re-connecting the hood circuit to the mains supply
and checking the efficient function, always check that the mains cable
is correctly assembled.
IMPORTANT! Power cable replacement must be undertaken by the
authorized service assistance centre or similar qualified person.
DK 1160
81,8
59,9
51,5
260 W
180 W
2 x 40 W (E14)
150 cm
220-240 V
5At
DK 1190
114,8
89,9
51,5
260 W
180 W
2 x 40 W (E14)
150 cm
220-240 V
5At
59