Tumble Drying; Sort Your Fabrics; Turn On The Main Power Switch; Open The Door, Load The Items And Then Close The Door - grandimpianti GD6C Bedienungsanleitung

Tumble drying

Below are step-by-step instructions to help you
achieve the best possible tumble-drying results.

Sort your fabrics

1
You will achieve the most uniform drying
results if the items are made of the same
type of material. Do up zips and buttons, fasten
belts, sort the items and adjust the load and
temperature.

Turn on the main power switch.

2
Open the door, load the items
3
and then close the door

Select the programme

4
Guidelines as to what specific
programmes can be used for.
The Auto extra dry, Auto dry and Auto normal dry
programmes have two temperature settings.
Normal temperature but also low temperature for
more delicate items.
Auto extra dry
This programme is for items that are particularly
difficult to dry, e.g. jeans with very thick seams.
Auto dry
These programmes shut off the heat once the
load is dry but before it is "over dry". The Auto dry
programme shuts off the heat slightly later than
Auto normal dry. Use trial and error to find out
what works best. Use these programmes when
you want items to be completely dry.
Auto normal dry
These programmes shut off the heat once the
load is dry but before it is "over dry". The Auto dry
programme shuts off the heat slightly later than
Auto normal dry. Use trial and error to find out
what works best. Use these programmes when
you want items to be completely dry.
Auto extra dry
This programme is for items that are particularly
difficult to dry, e.g. jeans with very thick seams.
10
(low temperature)
Auto dry (low temperature)
These programmes shut off the heat once the
load is dry but before it is "over dry". The Auto dry
programme shuts off the heat slightly later than
Auto normal dry. Use trial and error to find out
what works best. Use these programmes when
you want items to be completely dry.
Auto normal dry
These programmes shut off the heat once the
load is dry but before it is "over dry". The Auto dry
programme shuts off the heat slightly later than
Auto normal dry. Use trial and error to find out
what works best. Use these programmes when
you want items to be completely dry.
Auto iron dry
This programme shuts off the heat once the load
is just damp enough for ironing or pressing.
(low temperature)