AEG HE634070XB Benutzerinformation Seite 13

Problem
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactivated.
Residual heat indicator does
not come on.
Automatic Heat Up does not
operate.
You cannot activate the out-
er ring.
There is a dark area on
the multiple zone.
The sensor fields become
hot.
There is no sound when you
touch the panel sensor
fields.
comes on.
comes on.
and a number come on.
Possible cause
STOP+GO operates.
There is water or fat stains
on the control panel.
You put something on one
or more sensor fields.
The zone is not hot because
it operated only for a short
time or the sensor is dam-
aged.
The zone is hot.
The highest heat setting is
set.
It is normal that there is a
dark area on the multiple
zone.
The cookware is too large or
you put it too near to the
controls.
The sounds are deactivated.
Automatic Switch Off oper-
ates.
Child Safety Device or Lock
operates.
There is an error in the hob.
ENGLISH
Remedy
Refer to "Daily use".
Clean the control panel.
Remove the object from the
sensor fields.
If the zone operated suffi-
ciently long to be hot, speak
to an Authorised Service
Centre.
Let the zone become suffi-
ciently cool.
The highest heat setting has
the same power as the func-
tion.
First, activate the inner ring
by changing the heat set-
ting.
Put large cookware on the
rear zones if possible.
Activate the sounds. Refer to
"Daily use".
Deactivate the hob and acti-
vate it again.
Refer to "Daily use".
Deactivate the hob and acti-
vate it again after 30 sec-
onds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin-
ues, speak to an Authorised
Service Centre.
13