Troubleshooting; Technical Specifications - ANT UNO G8 Bedienungsanleitung

Series

4 | TROUBLESHOOTING

PROBLEM LEDS
No sound or very Transmitter
low sound level. LCD not lit.
Receiver LCD turned off.
Receiver RF LED turned off.
Transmitter LED turned on.
Receiver RF indicator is on.
The beltpack display is on,
the MUTE LED is lit.
Receiver RF indicator is on.
Distortion or unwanted Receiver RF LED
interferences. turned on.
Transmitter
batteries status
LED flashes.
Distorted sound.
Receiver LCD
shows a too high
AF level.
UNO G8 Series
12 User manual |
SOLUTION
Make sure the transmitter is on
and batteries charged.
Check the power supply
Turn on the unit
Make sure the transmitter and receiver
share the same frequency.
Reduce the distance between transmitter
and receiver,
Check that the transmission space
("visual contact") between transmitter
and receiver is free.
Make sure the receiver antennas are
properly connected, V shaped and pointing
upward.
Deactivate MUTE function.
Raise receiver gain.
Raise the transmitter gain.
Check audio connection between receiver
and mixer.
Check mixer configuration.
Remove possible sources of interference
such as CD players, computers, digital
broadcast sources, etc.
Replace batteries.
Lower transmitter gain.

5 | TECHNICAL SPECIFICATIONS

RECEIVER - UNO G8R
Type True Diversity
Modulation FM
Frequencies range 1785 - 1800MHz
Channels 192 (12 x 16 groups)
Antennas x2 - BNC
Frequency response 50Hz – 16.000Hz (±3dB)
Signal-to-noise ratio >95dB
Squelch Low, Mid, High
Transmission optimisation Pilot tone
T.H.D. <0,8%
Audio outputs Balanced XLR, unbalanced 6,35mm (1/4") jack
Balanced output level + 6dBu
Controls Power, Value up, Value down, ASC, SET
Indicators Multi-function LCD
Dimensions (W x H x D) 212 x 44 x 166 mm (8.34" x 1,73" x 6.54")
Weight 910 g (32 oz)
UNO G8 Series
13
| User manual