Rear Panel - ANT UNO G8 Bedienungsanleitung

Series

REAR PANEL

1 3 2
1 "DC 12-18V" POWER SOCKET
Connect to this socket only the supplied power supply.
2 UNBAL
Unbalanced audio output with 6,35mm (1/4") jack. Connect this output to an
unbalanced input of your mixer.
3 BALANCED
Balanced audio output with XLR-M socket. Connect this output into a balanced input
of your mixer.
4 A/B SOCKETS
Connect the provided antennas to these panel BNC sockets.
2.2 | HANDHELD MICROPHONE - UNO G8M
1 2 3 4 6
UNO G8 Series
6 User manual |
4
5 7
1 GRILLE
It protects the microphone capsule from impacts and/or accidental falls
and it reduces the noise of the plosive.
2 MULTI-FUNCTION DISPLAY
This LCD features a number of controls and indicators, such as the group
and channel number, icons of MUTE and lock, and the 4-segment battery
status indicator.
NOTE: the backlight automatically turns off after a short while.
3 ON/OFF
Press this button for 2" to turn ON or OFF the handheld wireless mic.
Press briefly this buttton to turn ON/OFF the MUTE function.
4 BI-COLOR INDICATOR
GREEN LED: microphone ON
RED LED: MUTE activated
5 BATTERIES COMPARTMENT
To access the battery compartment unscrew the lid counterclockwise,
and screw the lid clockwise to close it. To replace batteries unscrew the
lid counterclockwise, lift the batteries, insert two AA type new batteries
(following the compartment icon) and screw the lid clockwise.
In order to ensure proper operation, make sure the lid is securely screwed.
Remove the batteries from the transmitter when not in use for extended
periods.
6 GAIN
To access to GAIN adjustment, unscrew the lid counterclockwise.
Turn the screw clockwise to raise the gain, anticlockwise to reduce it.
7 IR WINDOW
It allows the synchronization of the channel (frequency) with the receiver.
After pressing the receiver ASC button, place the bottom of the wireless
microphone close to the IR window of UNO G8R receiver and wait for
the selected channel to stop flashing on the handheld display. After few
moments the synchronization process ends, and the RF signal level
indicator will show the presence of signal.
UNO G8 Series
7
| User manual