Technical Data - Renlig FWM5 Handbuch

ENGLISH
Problem Possible cause
The door lock has not been re-
leased.
There is water in the drum.
The transit bolts and packing have
not been removed.
The appliance The support feet have not been ad-
produces an un- justed
usual noise
The drain filter could be blocked.
Too little detergent or unsuitable
detergent has been used.
Stubborn stains have not been trea-
ted prior to washing.
Unsatisfactory
The correct temperature was not
washing results:
selected.
Excessive laundry load.
After the check, switch on the appliance and
press the button 5 to restart the programme.
If the malfunction shows again, contact your
After Sales Service.
Model description (MOD): .....................
Product number (PNC): ...........................
Serial number (S.N.): ...............................

Technical data

Dimensions
The necessary data for the service centre is
on the rating plate. We recommend that you
write the data here:
Width (cm)
Height (cm)
Depth (cm)
Solution
Wait a few minutes before opening
the door.
Select drain or spin programme to
empty out the water.
Check the correct installation of the
appliance.
Check the correct levelling of the
appliance.
Check the drain filter. (Refer to
"Cleaning the drain filter" for more
details).
Increase the detergent quantity or
use another one.
Use commercial products to treat
the stubborn stains.
Check if you have selected the cor-
rect temperature.
Reduce the laundry load in accord-
ing to the Washing Programmes ta-
ble.
Made In Italy
© Inter IKEA Systems B.V. 1999
000.000.00
21552
22
59,6
84,5
53,7