Maximum XO-40-S Gebrauchsanleitung Seite 40

4.3.1 Antenna Setup for DiSEqC 1.2
1. Select Motor Antenna in Antenna Connection.
2. Enter Antenna Setup, navigate with the arrow key DOWN to the Motor Type
option and select DiSEqC1.2 by LEFT/RIGHT button.
3. Navigate with the arrow key DOWN to Motor Setting option and press OK button.
Motor Setting
Satellite/ Transponder
Select a Satellite and a Transponder.
Position No. & Save
Press LEFT/RIGHT button and select one of the 64 settings (0 to 63). You also can
press numeric keys directly to input Position No.
Go to x
Press OK button and select one of the 64 settings (0 to 63). Press OK button and it
shows a message on the screen "Wait to move the position!"
Save
Press LEFT/RIGHT button to move dish, press OK button to save the position.
Recalculation
Press OK button to recalculate.
4. Navigate with the arrow key DOWN to Delete All, press ok to delete all satellite
positions. This item is only valid in "DiSEqC1.2" mode.
5. Navigate with the arrow key DOWN to Limit Setup, press OK button.
Limit Setup
Set East/West limit. Select East Limit/West Limit by LEFT/RIGHT button.. Press OK
button to limit.
13
ENGLISH