Lenze EPM-H520 Betriebsanleitung Seite 68

Show/Hide Bookmarks
Installation
Take off the housing cover
Fig. 3-3 Take off the housing cover
1. Loosen bolts
Flash module 8 MB (back-up) mounting
Fig. 3-4 Flash module 8 MB (back-up) mounting
1. Insert the distance pins
2. Carefully insert the flash module
3. Align the bores of the flash module
4. Press the flash module
68
back-up expansion
0
1 V-
2 CAN-
3 Shield
4 CAN+
INPUT VOLTAGE:
5 N.C.
18 - 32 VDC 15 W
4
3 N.C.
fuse 1.25 A
2 0 VDC
1 +24 VDC
&
and remove housing cover
B
C
'
into the bores of the main board and press until they click into place
&
&
&
onto the distance pins
EDBEPM-H520 DE/EN/FR 4.0
A
)
into the female plug strip and slightly press to fix them
and the distance pins '
'
until they click into place
h520_009
h520_012
L