Design And Function - Vigor V 2480 Betriebsanleitung

Design and function

1. Function and description (technical data)
1. Load capacity in tonnes
2. Min. height
3. Max. height
4. Length of frame
5. Width of frame
6. Length of lever
7. Width
8. Rubber joint Ø
9. Front castors Ø
10. Rear castors Ø
11. Net weight
12. Gross weight
2. Before use
Raising the load:
• Attach and secure the lever.
• Secure the vehicle with chocks to prevent it from moving.
Use the lever to bring the jack to the desired position.
• Close the valve by turning it clockwise until it stops.
• V 2649: With the pedal pump the hydraulic arm fast to the desired height.
• Use the lever to pump the load to the desired height.
• Immediately secure the load with supports (e.g. ViGOR jack stands V 2477) after raising the load.
Lowering the load:
• Raise the load in order to carefully remove the supports.
• Stick the lever onto the valve and slowly turn anticlockwise until the load lowers. Ensure that the valve is
opened slowly to prevent the load from lowering in jerky movements. If the load cannot be lowered, use
another jack to lower the load and then have the function of the first jack inspected by a specialist.
• Once the load has been lowered, close the valve by turning the lever clockwise.
• Keep these operating instructions. For your own safety, read and follow these instructions. The owner
and user should have current information about the jack at all times for the safe use of this product.
Instructions and safety information must be made available to the user in his or her native language be-
fore this product is used. Ensure that the user is aware of the risks associated with the use of this product.
• If there is any suspicion that the user does not know all of the required safety information, the safety and
operating instructions for this product must be provided to the user in his or her own language.
• This jack is not suitable for use as a transport aid or for lifting caravans, mobile homes or for other general
applications. This jack is only suitable for lifting one side or the rear of a vehicle.
• Never exceed the maximum load. Use this tool only on hard and even floors. Use this tool only for lifting.
• Do not move the jack under load.
• Only use the jack for vehicles as stipulated by the vehicle manufacturer.
V 2480
t 3
mm 130
mm 490
mm 720
mm 152
mm 1280
mm 360
mm 138
mm 90
mm 60
kg 41
kg 43
V 2481 V 2649
1.35 2
80 85
380 490
500 675
121 363
960 890
240 365
105 114
43 70
42 65
10 37
11 38
13