Other Convenient Functions - Sharp R-92ST Bedienungsanleitung

OTHER CONVENIENT FUNCTIONS

1. SEQUENCE COOKING
This function quickly defrosts food while enabling you to choose a suitable defrost period, depending on the food type. Follow
the example below for details on how to operate this function. The time range is 0:10 – 99:50. This function allows you to cook
using up to 2 diff erent stages which can include manual cooking time and mode and /or time defrost as well as weight defrost
function. Once programmed there is no need to interfere with the cooking operation as the oven will automatically move onto
the next stage. The audible signal will sound once after the fi rst stage. If one stage is defrosting, it should be in the fi rst stage.
Note: Auto menu cannot be set as one of the multiple sequences.
Example : If you want to defrost the food for 5 minutes, then to cook with P80 microwave power for 7 minutes. The
steps are as follows:
- 1. Press the WEIGHT DEFROST/TIME DEFROST button
- 2. Enter the defrosting time by rotating the ENTRY dial until the display show "5:00" minutes.
- 3. Press the MICROWAVE POWER LEVEL button
- 4. Input the power level by pressing the MICROWAVE POWER LEVEL button
to select the microwave power to P80.
- 5. Press the START/+30sec/CONFIRM button (
- 6. Enter the cooking time by rotating the ENTRY dial until the display show "7:00" minutes.
- 7. Press the START/+30sec/CONFIRM button (
2. +30sec FUNCTION (Direct start)
The START/+30sec/CONFIRM button (
a. Direct start
You can directly start cooking on P100 microwave power level for 30 seconds by pressing the START/+30sec/CONFIRM button. (
The cooking process will start immediately, whereas each time pressing the button will increase the cooking time by 30 seconds.
b. Extend the cooking time
You can extend the cooking time during manual, grill, convection, combi cooking and time defrost for multiples of 30 seconds if the
START/+30sec/CONFIRM button (
function and sequence cooking, the cooking time cannot be increased by pressing START/+30sec/CONFIRM button (
NOTE: The cooking time may be extended to a maximum of 95 minutes.
3. DELAY START
DELAY START cooking allows you to program the oven to start cooking at a point later in the day.
Before setting, make sure the clock is set to the correct time of day.
Example:
Follow the example below for starting the microwave automatically at a later point of time. The maximum time-delay is 23
hours and 59 minutes.)
- 1) Press the MICROWAVE button
- 2) Press the START/+30sec/CONFIRM button (
- 3) Enter the cooking time by rotating the ENTRY dial until the display show "7:00" minutes.
After the above steps, please do not press START/+30sec/CONFIRM button (
- 4) Press the CLOCK/DELAY START button
flashing.
- 5) Rotate the ENTRY dial to set delay in hour(s) to start the cooking operation.
- 6) Press CLOCK/DELAY START button
- 7) Rotate the ENTRY dial to set delay in minute(s) to start the cooking operation.
- 8) Press the START/+30sec/CONFIRM
- 9) Delay duration set will be displayed with countdown started. Cooking operation will start upon countdown
completion (displayed countdown back to "0:00").
4. CHILD LOCK:
Use to prevent unsupervised operation of the oven by little children.
a. To set the CHILD LOCK:
Press and hold the STOP key for 3 seconds until a long beep sound. On the display will light the lock indicator:
b. To cancel the CHILD LOCK:
Press and hold the STOP key for 3 seconds until a long beep sound. The lock indicator will disappear.
once.
)to confi rm the setting.
) to start cooking.
) allows you to operate the two following functions:
) is pressed while the oven is in operation. During weight defrost and auto menu
once and turn the ENTRY dial to select the microwave power level to P80.
) to confi rm the setting.
( )
once. The display will show "0:00" with the hour figure
( ) and the minutes figure will flash.
(
button
GB-22
twice, in the LED display will appear dEF2.
once more for P80 or turn the ENTRY dial
)
to confirm the setting for the delay start.
).
).
).