VEVOR SX3 Originalanleitung Seite 9

HOW TO USE
Product Back - Figure 1 Product Back - Figure 2
1.Installation (refer to Figure 1 and Figure 2)
Unlock: Move and hold the module lock on the back of the display screen
to the left.
Insertion: Fully insert the handle into the card slot on the back of the
display screen, and then smoothly insert it to the bottom.
Locking: Release the module lock, and the display screen and handle
assembly are now complete.
Disassemble
Unlock: Move and hold the module lock on the back of the display screen
to the left.
Remove: Gently pull the handle out of the card slot on the back of the
display screen.
- 8 -