VEVOR SX3 Originalanleitung Seite 7

1. Settings: Short press to enter settings; You can adjust the language,
date/time, date label, etc. Short press again to exit the settings.
2. Gallery: Short press to enter the library, browse images, replay videos,
long press to delete the current image or video (delete current and all),
short press again to exit the operation.
3. Power on/off: Press and hold for 2 seconds to turn on, then press and
hold for 2.5 seconds to turn off.
Freeze frame: Short press to freeze the image. At this time, the image
cannot be moved. Short press again to exit the freeze frame.
4. Flip: Short press to flip up and down.
5. Joystick: controls the direction of rotation of the probe.
6. Video Recording: Short press to record, short press again to terminate
recording (requires inserting a TF card to operate, if not terminated midway,
record a video every 5 minutes).
OK: In the settings and gallery, short press to confirm the selection.
7. Zoom out: Short press to zoom out the real-time image by X8 /X6 /X4
/X2/X1.
Down: In the settings and gallery, short press and select Down.
8. Zoom in: Short press to zoom in on the real-time image by X1 /X2/X4
/X6/X8 .
Up: In the settings and gallery, short press and select Up.
9. Dimming button: Adjust the brightness of the lens LED light (default 3rd
gear is the brightest,3, 2, 1, 0).
10.Handle
11.Charging indicator light: when charging , red light ; When fully charged,
off.
Reset button: In case of lagging and inability to charge, press here with a
tooth-pick or pen core.
12.Type-C interface: Before use, please use a DC 5V 1A power adapter to
charge the display screen.Data transmission: When a TF card is inserted
into the display screen, it can be connected to a computer through a data
cable to export images and videos.
- 6 -