Care And Maintenance - Kite Optics Apc Stabilized 42 Ed Bedienungsanleitung

USE OF THE DEVICE WITHOUT POWER
Apart of power on and o , the power switch also acts as a physical lock for the internal gimbal. When the device enters SLEEP mode while the power switch is
still in the ON position, the internal gimbal system is no longer actively powered but will be free in movement. This free movement can be felt when shaking the
binocular, or seen when looking through the binoculars as a very unstable and shaky image. In the same way, placing the power switch to ON position while
no batteries are placed or with a dead battery, will cause the gimbal system to be unlocked and move freely. This is normal.
You can perfectly use the device as a conventional binocular when no battery is placed or when battery is dead. Only keep in mind to put the power switch in
OFF position so the gimbal is locked.

CARE AND MAINTENANCE

Your instrument does not require any special maintenance. We advise you to take good care of the lens and make sure the instrument is well stored when it is
not being used. Cleaning of the lens: Always remove large particles first, using a soft brush or by blowing them away. Large particles such as sand or salt could
cause scratches on the lens surface during cleaning. For thorough cleaning we recommend breathing onto the lens surface to form a coat of condensation
and then cleaning it with a soft and moist cloth. Never press hard or use force while wiping the lens. We advise not to use liquids meant for spectacle cleaning,
unless they are advised for binoculars or scopes. Some liquids can bring damage to the coatings of your sight.
STORAGE
− Keep your device stored in its bag in a well-ventilated area.
− In case of moisture exposure, ensure thorough drying before storage.
− In high-humidity or tropical environments, consider using an airtight container with a moisture-absorbing agent (e.g. silica gel).
− Avoid subjecting the device to excessive heat, such as direct sunlight or fire.
− Avoid storing in areas with dramatic temperature changes.
− Do not leave the batteries in the unit for a long time when not in use. The electrolyte solution in the battery may leak, damaging the unit.