Warning
• Only use suitable charging devices or USB connections for charging.
• As a rule, do not use charging devices or USB connections that are defective and do
not try to repair them yourself.
• Connect the included Micro-USB cable to the Micro-USB input (1) on the Power Pad
and to a suitable USB charger. Take note of the technical specifications in point 8 of these
instructions, and of the operating instructions of the USB charger being used.
• Insert your terminal device with its back in the Power Pad (B).
• Charging starts as soon as an effective induction field has been generated. The current
charging status appears on your terminal device.
• If no connection can be established through induction, you may have to change the
position of your terminal device (B).
• Charging stops automatically once your device's battery is fully charged.
• Remove your terminal device from the inductive charger and disconnect the charger from
the power supply.
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive
cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting
from improper installation/mounting, improper use of the product or from failure to observe
the operating instructions and/or safety notes.
7. Service and Support
Please contact Hama Product Consulting if you have any questions about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
4