Care And Maintenance; Warranty Disclaimer; Technical Data; Declaration Of Conformity - Hama QI-FC10 Bedienungsanleitung

• Place your device with its back on the inductive charger (B).
• The charging process begins as soon as an effective induction eld has been established. The status LED
(2) lights up solid red. The current charge status is displayed on your device.
• If no induction connection can be established, change the position of your device if necessary (B).
• The charging process ends automatically once your device's battery is fully charged. The status LED (2)
lights up solid blue.

5. Care and maintenance

Only clean this product using a lint-free, slightly damp cloth and do not use any harsh cleaners. Ensure that no
water is able to enter the product.
Note
Disconnect the device from the mains before cleaning and during prolonged periods of non-use.

6. Warranty disclaimer

Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from improper
installation/mounting, improper use of the product or from failure to observe the operating instructions and/
or safety notes.

7. Technical data

Wireless charger
Output (under optimised conditions)

8. Declaration of conformity

Hama GmbH & Co KG hereby declares that the radio equipment type [00201683] is in compliance
with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following Internet address:
www.hama.com -> 00201683 -> Downloads.
Frequency band(s)
Maximum radio-frequency power transmitted
8
Input
Dimensions
5 V
9 V
5 W / 7.5 W / 10 W max.
Ø 101.5 mm x 6.6 mm
100.10 – 160.80kHz
4.05 dBµA/m at 10 m distance
2.0 A
1.67 A