Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Characteristics and range for use:
1. Voltage: 230V Ph/E
2. Fault Current Generated: > 30mA
3. Frequency: 50Hz and 60Hz(±5%)
MainTenanCe
replacing the battery
Disconnect the tester from the circuit under test before battery replacement.
1. Remove the screws on the battery cover and remove the battery cover.
2. Replace the old battery with a new one of the same type.
3. Reinstall the battery cover and the screws.
Cleaning
Before cleaning, disconnect the tester from the circuit under test. Use moist cloth and mild
detergent to clean the tester. Never use abrasive or solvent.
After cleaning, do not use the tester until it is completely dry.
noTe
1. This manual is subject to change without notice.
2. Our company will not take the other responsibilities for any loss.
3. The contents of this manual can not be used as the reason to use the tester for any special
application.
disposal of THis arTiCle
Dear Customer, If you at some point intend to dispose of this
article, then please keep in mind that many of its components
consist of valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check with
your local council for recycling facilities in your area.
12
Werbung
Inhaltsverzeichnis
