AGS RSC2-433 Bedienungsanleitung Seite 12

ATTENTION
Functional disturbances caused by environmental
conditions
These conditions can impair function!
Protect the hand transmitter from the following conditions:
• Direct sunlight (perm. ambient temperature:
-20°C to +60°C)
• Moisture
• Dust
NOTE:
Local conditions may affect the range of the radio system.
Each time the button on the hand transmitter is pressed,
O
the LED a emits a signal. If the LED lights up, the trans-
mitter is operating.
If the LED flashes when the button is pressed, transmission
is still going on but the battery is so low that it urgently
needs replacing.
If the LED fails to respond, check whether the battery is cor-
rectly inserted (see Fig. 1). Replace the battery if necessary.
Figures 1
Putting into operation/Changing the battery
• Open the hand transmitter as shown.
• Remove the spent battery and insert the new one,
making sure to pole correctly.
• Re-close the hand transmitter.
12 TR20L002-A RE / 08.2010