Making A Voice, Fm Or Line In Recording - Creative Rhomba NX Handbuch

RhombaNX_multi .book Page 9 Friday, December 17, 2004 10:15 AM
Storing your FM channel
1. In FM mode, press the Mode scroller to select a preset number for FM channel storage. An
unused preset number appears on the LCD.
2. Turn the Mode scroller towards the right or left to select the preset number you want.
3. Press the Mode scroller to select the preset number. The selected preset number is
highlighted. Press the Play/Pause button to save the preset.
4. To clear a selection, press the Mode scroller again.
Changing the FM frequency
1. In FM mode, turn the Mode scroller towards the right to increase the frequency band, or
towards the left to decrease the frequency.
2. To perform an autoscan, move the Mode scroller towards the right or left and hold.
3. To select a preset channel, if you have any, press the Play/Pause button
4. To select the next available preset channel, press the Play/Pause button

Making a voice, FM or Line In recording

1. In VOI, FM or ENC mode, press the Record button
The recording bar appears on the screen.
You can listen to your recording in real-time as it is being recorded.
2. Press the Record button
A name is automatically assigned to your recording and is saved as an .MP3 file in your player.
The naming conventions typically used are:
- Voice[Current File Number] for voice recordings
- FMDAT[Current File Number] for FM recordings
- Line_[Current File Number] for Line In recordings
When recording, the available recording time is determined by:
- available memory space in your player.
- battery power remaining in your player.
again to end the recording.
.
again.
to start the recording.
9