Operating The Device - Superior Rcy39A Bedienungsanleitung

DEVICE OVERVIEW / USING FOR FIRST TIME /
HOT AIR CURLING IRON
HOT AIR CURLING IRON
1) Brush head
2) Release knob for brush head
3) Fan speed (0 = off / 1 = low / 2 = high)
4) Voltage adjustment screw
5) Power cord with mains plug
USING FOR FIRST TIME
• Take all the device components out of the pa-
ckaging and remove all packaging material and
enclosures.
• HOT AIR CURLING IRON: Ensure that the pre-ad-
justment of the device voltages (4) corresponds with
the mains supply you are using (Germany: 230V).

OPERATING THE DEVICE

The devices can be used to dry and shape towel-dried
hair and also shape dry hair.
Note:
Please note that based on the type and thickness of
the hair, the time needed for the use of the devices will
vary. Be particularly careful to note above all that the
hot air curling iron may be used for just a limited time
on delicate hair. To counter the effects, use a suitable
hair protection spray on sale to protect the hair and
particularly the ends from over-dryness/overheating
HAIR DRYER:
• Remove the cable trap and fully unwind the power
cord.
2
1
• Always ensure that the switch (1) used to regulate
the fan speed is set to 0 and subsequently connect
the device to the mains supply.
• The device can be used at the desired fan speed,
namely 1 (light), 2 (medium) or 3 (strong).
• To blow-dry the hair, the enclosed nozzle or diffuser
may be used.
Nozzle: The nozzle allows you to obtain a concen-
trated air stream. The nozzle is suitable for targeted
blow-drying / styling of individual sections or hair or
to quickly dry straight hair.
Diffuser: The diffuser allows curly hair to be shaped
while blow-dried. The air stream is agitated and the
curls dry more slowly. Blow-drying with the diffuser
allows the hair to be fully dispersed, thus better
defining curls.
• Replacing the attachments: To exchange the attach-
ments (nozzle / diffuser), remove the attachment
in question from the blow-drier and simply replace
with the new attachment onto the blow-drier using
slight pressure. The attachments will click audibly
into place.
CAUTION: Always unplug the device before
changing the attachments and allow the at-
tachment being removed to cool down fully
12
4
3
5
GB