Beurer HT 50 Gebrauchsanweisung Seite 15

Important
• Do not jam the mains cable [11] in drawers or doors, for example.
• Untangle the mains cable [11] if it is twisted.
• Do not pull, twist or bend the mains cable [11] and do not pull or route it over/on sharp, pointed
objects or hot surfaces.
Note
A slight odour initially develops after switching on the device for the first time. This is normal and not
harmful to your health. Allow the device to run for three to five minutes. After that you can use the
device as normal.
• For your safety, the device switches off automatically if it overheats.
• Pull the mains plug out of the socket and allow the device to cool down.
• Before switching the device back on, check the air outlet [4] and the air intake filter [8] for any
blockages (e.g. sucked-in fluff, dust or hair).
Shaping hair
> Use the sliding switch [6] to select the desired temperature and air blower setting.
> Dry and/or style your hair as you wish.
> After each use/interruption, always set the hot air styler slide switch to off [6] (position 0).
> Remove the plug from the socket after each use.
> Let the unit cool down.
> Do not wind the mains cable around the unit!
> Store the unit in a dry place that is out of reach of children.
> The unit can be hung on a hook by the hanging eyelet [10].
Selecting the temperature level
The hot air styler has three temperature and air blower settings that can be selected using the
sliding switch [6]:
Level Description
0 Off
Cool air to hold the hair in place.
1 For drying hair gently.
2 For drying hair normally.
15