Hisense RQ600P7SKE Bedienungsanleitung Seite 27

Display controls
UV Tech
The function of UV sterilization is
turned on by default , and the "
icon is lit up. When water dispenser
need water, the UV sterilization
module lights up to sterilize the water.
Click the '' '' icon to turn the UV
sterilization function on or off. When
the " " icon goes off and the
sterilization module stops working.
SenseLight
After turning on this function, the light
will be triggered by the user's
movement at a distance of about 1m in
front of the refrigerator. The
"TouchLight" lighting function is turned
off.
Note: The sensing distance will vary
according to different use
environments, which is a normal
phenomenon.
TouchLight
When the " " icon is highlighted,
touch the touch-sensitive area at the
bottom of the right door of the
refrigerator compartment with your
hand to light up the refrigerator light.
When this feature is turned on, the
"SenseLight" illumination function is
turned off.
"
Light remain time
Users can customize the delayed
lights-out time according to their
actual usage.
When the ''SenseLight'' mode is set, the
user is delayed to set the lights-out
time to turn off the lights after the
refrigerator does not detect the user.
When the ''TouchLight'' mode is set,
turn on the refrigerator freezer light,
then turn off the light after the user
sets the lights-out time.
To switch on/off the display
The button is located at the top of the
left door.
1. You can press ''ON'' to switch on the
display.
2. You can press "OFF" to switch off the
display.
When the screen freezes or has other
problems, you can try to power off the
screen by switching off, and then
press "ON" to restart the screen.
ON
OFF
25