Hisense RQ600P7SKE Bedienungsanleitung Seite 19

Installing your new appliance
The water tube must be fully inserted
into the center of the connector to
prevent water leaking. Insert the 2
clips in the installation pack as shown
in the diagram, and then confirm that
each clip holds the line firmly.
It is normal that there will be sound of
exhaust coming out from the
appliance when you connect the
water line to the appliance and press
the lever of the dispenser for the first
time.
Clips
Water tube
Two-Way Connector
Connection status without extension
water tube:
Filter inlet line
Connection status with extension
water tube:
Water tube
Two-Way
Connector
Filter inlet line
1/4" extension water tube
Note:
Your product may look different from
this image in this instruction, depending
on your model's features.
Changing the water filter
To drink the freshest and cleanest water
from your refrigerator, change the filter
on time. To change the water filter,
follow these steps:
1. Shut off the water supply. Pull out
the cover(B) about 1.5 cm and open.
2. Turn the water filter (C) about 1/4 turn.
17