Hisense RQ600P7SKE Bedienungsanleitung Seite 25

Display controls
automatically returns to the set
temperature. When you enter the
energy-saving mode, the "Super
Freeze" and "Super Cool" modes are
turned off.
Changing the water filter
After drinking about 1,000 gallons of
water (about 6 months after using
the filter), the filter icon will alert you
to the need to change the filter. First,
you'll need to purchase a new filter.
You can purchase the filter at the
point of sale where you purchased
the fridge or at the Hisense after-
sales service point. Before
purchasing, you need to check that
the new filter matches the old one so
that it matches your fridge. After
changing the filter, make sure to
press the "Reset" button. When you
change the filter, a little water will
leak out of the filter and pipes. Catch
the water in a container and wipe it
dry.
℉/℃ : Convert button
There is a temperature unit toggle Th
button in the settings, and you can
touch the ℉/℃ button to make the
temperature switch between Celsius
and Fahrenheit.
Dispenser control
When the child lock icon light is on,
the dispenser stops working. The ice
cube shape type is selected by the
"Cubed" and "Crushed" buttons, and
the "Water" button is touched to
activate the drinking mode. When the
Ice Cube type button is touched, the
selected Ice Cubed or Ice Crushed
mode is activated, and the Ice Cubed
or Ice Crushed icon lights up on the
display interface.
If ice is not needed, turn it off to save
water and energy consumption (see
"Ice Maker" above). If you need
water, touch the
and the water icon will light up on
the display interface.
Ice&Water selection screen
Networking
Through the wireless network function
in the settings, the user selects the
Wi-Fi account to be connected and
enters the corresponding password to
connect to the network.
"Water" button
23