Preventing Burns And Scalds; For Your Child's Safety; Material Damage; Unpacking And Setting Up - NUK 10.256.378 Bedienungsanleitung

• Never touch the device, the power cord or the
mains plug with wet hands.
• Always remove the power cord by the plug.
Never pull on the power cord.
• Ensure that the power cord is never kinked or
crushed.

3.5 Preventing burns and scalds

Warning! Hot surfaces can lead to
burns, so:
• Never touch the inside of the device during
operation. Always wait until the device has
cooled down.
• The device emits hot steam during operation.
Avoid skin contact. Keep your face and hands
a safe distance away.
• We recommend not moving the device during
operation.
1. Take the individual parts out
packaging.
2. Check that the individual parts are complete
(see "1.3 Components" on page 16) and
undamaged.
3. Clean the device thoroughly before using it
for the first time (see "6. Cleaning and
storing" on page 22).
4. Set up device on a firm, level, non-slip, heat-
resistant surface so that it cannot tip over.

4. Unpacking and setting up

of the
• Always allow the device to cool down before
cleaning it.

3.6 For your child's safety

Warning! Plastic Bags may cause
suffocation.
• Plastic bags are not meant as a toy. Keep
away from children.

3.7 Material damage

Caution! To prevent material damage, follow the
instructions below.
• Do not place the device on a hot cooker
hotplate.
• Do not expose the device to direct sunlight,
as UV rays and overheating may make the
plastic brittle.
• Never switch on the device without filling it
with water.
19
G
B