M-VAVE Fuzz Benutzerhandbuch Seite 7

3. English
Introduction
The M-Vave Fuzz is a fuzz effect pedal that delivers a vintage, old-school tone with serious distortion. Its sound is dirty, strong, and
creamy, making it ideal for musicians looking for that classic fuzz sound. The pedal is equipped with 3 knobs for tone and gain
adjustment, allowing you to customize your sound. It also features a true bypass footswitch for easy switching between fuzz and
bypass, along with an LED indicator to show the pedal's status. The compact and durable zinc alloy shell makes it portable and
sturdy for long-term use.
Package Contents
• 1x M-Vave Fuzz Pedal
• 1x User Manual
Features
• Vintage fuzz tone with dirty, strong, and creamy distortion
• 3-knob control: TONE, GAIN to customize your sound
• True bypass footswitch for switching between fuzz and bypass
• LED indicator for effects and bypass status
• Durable zinc alloy shell with compact, portable design
• Note: Power adapter is not included
Specifications
• Input: 1/4" Mono Jack (impedance: 2.2M ohms)
• Output: 1/4" Mono Jack (impedance: 100K ohms)
• Power Supply: DC 9V AC adapter (center minus) (not included)
• Dimensions: 9 cm x 4 cm x 3.5 cm
• Weight: 220g
Instructions
1. Connecting the Pedal
a. Plug your guitar into the input jack using a 1/4" cable.
b. Connect the output jack to your amplifier or next pedal in the chain.
c. Use a DC 9V AC adapter (not included) to power the pedal.
1. Adjusting the Sound
a. TONE: Modify the overall tone of the fuzz effect.
b. GAIN: Adjust the amount of fuzz applied to your signal.
1. True Bypass Operation
a. The M-Vave Fuzz features a true bypass footswitch that lets you toggle between fuzz effect and bypass. The LED
indicator shows the pedal's current status.
Imported by: DanMusicPartner | Rugvænget 1 | DK-8500 Grenaa | Denmark |
info@danmusicpartner.com
M-Vave Fuzz User Manual - 1_en
Page 7 of 20