Herunterladen Diese Seite drucken

Clemco COOL AIR TUBE Bedienungsanweisung

Helm - luftkühlgerät

Werbung

B E D I E N U N G S A N W E I S U N G
O W N E R ' S M A N U A L
N O T I C E D'U T I L I S A T I O N
Refroidisseur d'air pour casque
Clemco
International GmbH
Revision: 02.2015
Helm - Luftkühlgerät
Helmet Cool Air Tube
COOL AIR TUBE
Art. Nr.: 04410 I
Part no: 04410 I
N°pièce :04410 I
Carl-Zeiss-Straße 21
83052 Bruckmühl
Germany
+49 (0) 8062 – 90080
Tel.:
Mail:
info@clemco.de
Web: www.clemco-international.com

Werbung

loading

Inhaltszusammenfassung für Clemco COOL AIR TUBE

  • Seite 1 O W N E R ’ S M A N U A L N O T I C E D'U T I L I S A T I O N Helm - Luftkühlgerät Helmet Cool Air Tube Refroidisseur d'air pour casque COOL AIR TUBE Art.
  • Seite 2 /min. betrieben werden. The Cool Air Tube must be fed via an upstream air filter (such as a CPF air filter) which supplies it with air that is free of dust, dirt and oil at a pressure of min. 5.8 - 6.6 bar and an air volume of min. 0.57 m /min.
  • Seite 3 Apollo Strahlhelm weitergeleitet wird. Mit dem Temperatureinstellknopf kann die Lufttemperatur reguliert werden. The Cool Air Tube is installed between the air filter and the Apollo air-fed helmet, and supplies the operator with cooled breathing air. The Cool Air Tube contains a vortex tube, which separates the incoming compressed air into warm and cold air.
  • Seite 4 Sieb herausnehmen, reinigen und wieder montieren. Die restlichen Teile sind wartungsfrei. Every week check and clean the sieve in the air inlet of the cool air tube. Undo the 1/4" plug connection, take out the sieve, clean it and refit it. All other parts are maintenance-free.
  • Seite 5 Wärmequellen führen. Symptom Possible cause Remedy (1) Insufficient air throughput. Filter in the Cool Air Tube air inlet Unscrew the plug connection, take clogged. out the sieve and clean it. Insufficient air pressure in the air Increase the air pressure (in the supply.
  • Seite 6 Stock no. Description 04410I Cool Air Tube complete 08973I Filter sieve AC Plug connection 1/4“ I for single-handed coupling 94262D 100261 Cool Air Tube AC separately (without belt) 04430I Belt 08981I Leather guard Pos. N° pièce Description 04410I Refroidisseur d'air complet...

Diese Anleitung auch für:

04410 i