Emos H1087 Bedienungsanleitung Seite 4

Risk of tripping:
• The power cord and the product must always be positioned so that it does not interfere with
normal walking areas.
• Risk of damage to the product:
• Use the product only as described in this document.
• Prevent the product from falling and protect it from impact.
• Do not use aggressive chemical cleaning agents when cleaning the product.
• Supervise children so that they do not play with the product.
EMOS Ltd. hereby declares that the radio equipment type H1087 complies with Directive 2014/53/
EU. The full text of the EU Declaration of Conformity is available on the following website
http://www.emos.eu/download.
The equipment can be operated on the basis of general authorisation No. VO-R/10/07.2021-8 as
amended.
Contents of the package
1× Indoor unit
1× outdoor unit
2× 18650 batteries
Rain screen
Technical Specifications
Indoor unit:
Battery: 18650, DC 3.7 V/2200 mAh
Power: DC 5 V/1 A
Communication: 433 MHz
Outdoor unit:
Battery: 18650, DC 3.7 V/2200 mAh
Communication: 433 MHz
Degree of protection: IP44
Description (see Figure 1)
1 – Indoor unit
2 – Outdoor unit
3 – Lock switch
4 – Lock control button
5 – Call answer/receive button
6 – Bell button
Lock switch wiring description (see Fig. 2)
Red: +12 V
Black: -12 V
Yellow: NC (Normally Closed)
Green: COM (common contact)
Blue: NO (Normally Open contact)
Commissioning procedure
1. Insert batteries in both indoor and outdoor units.
2. Mount both units on the wall (see Figure 3).
3. Stick the lock switch (3) to the wall using the tape on its back and connect the appropriate wiring
(see Figure 2 - wiring with lock).
4. Pair the lock switch (3) with the units by holding the encoder button (11) for at least 5 seconds
until the indicator (9) starts flashing blue. This will activate the pairing mode for 60 seconds.
5. During an active call, press the lock control button (4) on the indoor unit. This pairs the lock
switch with the indoor unit.
Lock switch
Installation material
USB-C cable
Instructions
The lock switch:
Power: DC 8~12 V
Communication: 433 MHz
Degree of protection: IP44
7 – Melody selection button (8 options)
8 – Volume adjustment button (4 levels)
9 – Lock switch status indicator
10 – Exit button
11 – Coding button
4