Herunterladen Diese Seite drucken

Troubleshooting - TFA 60.5012 Bedienungsanleitung

Funk-projektionsuhr

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
TFA_No. 60.5012_Anleitung_10_16
Radio-controlled projection clock
B. With permanent projection:
• Connect the power adapter and slide the CONTINUE PROJEC-
TION switch upwards.
• Press the FLIP button to turn the image by 180°.
• Turn the dial and set the focus.
8. Care and maintenance
• Clean the instrument with a soft damp cloth. Do not use sol-
vents or scouring agents. Protect it from moisture.
• Remove the batteries and pull out the plug of the socket, if
you do not intend to use the product for a long period of
time.
• Keep the device in a dry place.
8.1 Battery replacement
• Change the batteries when the functions of the device
become weak.
• Open the battery compartment and insert two new batteries
1.5 V AAA, polarity as illustrated.

9. Troubleshooting

Problems
No hand movement
No projection
No DCF reception
Incorrect indication
If your device fails to work despite these measures contact the
supplier from whom you purchased it.
10. Waste disposal
This product has been manufactured using high-grade materials
and components which can be recycled and reused.
Never dispose of empty batteries and rechargeable
batteries in household waste.
As a consumer, you are legally required to take
them to your retail store or to an appropriate collec-
tion site depending on national or local regulations
in order to protect the environment.
12
13.10.2016
14:43 Uhr
Solution
➜ Ensure that the batteries polarities
are correct
➜ Change the batteries
➜ Control the power adapter
➜ Slide the switch CONTINUE PRO-
JECTION in direction of the arrow
➜ Remove the batteries for one
minute and insert them again
➜ Wait for attempted reception
during the night
➜ Choose another place for your
product
➜ Check if there is any source of
interference
➜ Change the batteries
Seite 7
Radio-controlled projection clock
The symbols for the heavy metals contained are:
Cd=cadmium, Hg = mercury; Pb=lead
This instrument is labelled in accordance with the
EU Waste Electrical and Electronic Equipment Direc-
tive (WEEE).
Please do not dispose of this instrument in house-
hold waste. The user is obligated to take end-of-life
devices to a designated collection point for the dis-
posal of electrical and electronic equipment, in order
to ensure environmentally-compatible disposal.
11. Specifications
Power consumption:
AC adaptor (included)
Input: 240V AC / 50Hz
Output: 3V DC / 100mA (0,3W)
Batteries 2 x 1,5 V AAA (not included)
Housing dimension:
115 x 51 x 83 mm
Weight:
129 g (instrument only)
No part of this manual may be reproduced without written consent of TFA Dost-
mann. The technical data are correct at the time of going to print and may
change without prior notice.
The latest technical data and information about your product can be found by
entering your product number on our homepage.
EU declaration of conformity
Hereby, TFA Dostmann declares that the radio equipment type 60.5012 is in com-
pliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address:
www.tfa-dostmann.de
E-Mail: info@tfa-dostmann.de
TFA Dostmann GmbH & Co.KG
Zum Ottersberg 12, D-97877 Wertheim, Germany
10/16
13

Werbung

loading