Proper Use; Technical Data - Auerswald COMfortel WS-Base Betriebsanleitung

Proper Use

Important: Auerswald products are not designed, manufactured,
or intended for use or resale, in environments that require fail-
safe performance, such as in the operation of life-support sys-
tems and/or nuclear facilities. Our products may only be used for
these purposes with prior written permission from Auerswald in
each individual case.
Important: Improper use may, for example, cause functional
restrictions or interference, the destruction of the device or, in a
worst-case scenario, personal injury.
If you are still uncertain about how to use the product properly
after reading the chapter below, please contact your special-
ised dealer.
Read the instructions for the device and keep them for future
reference.
The COMfortel WS-Base is an IP-DECT Multicell Base.
The WS-Base controls in an IP-DECT multicell system the DECT
radio transmissions and the connection between the handsets
and multicell server (COMfortel WS-400 IP (Multi) or COMfortel
WS-650 IP).
The WS-Base is designed to be used in closed, dry rooms.
To configure the wireless system via the Configuration Manager
you must use a PC which is running in the same network (sub-
net).

Technical Data

Operating voltage
PoE class
Power consumption
Operating temperature
Storage temperature
Transfer protocol
COMfortel WS-Base - Instructions V05 08/2017
Important Information
Power over Ethernet (PoE in accord-
ance with IEEE 802.3af) or wall wart
(not in the scope of delivery)
1
Approx. 2 W
+10 to +40 °C
-50 to +70 °C
DECT/GAP
15